www.samtec.com sctp sfltp assembly length assembly length spirit ? test probe cables ?12.00, ?24.00, ?36.00 = assembly length in inches ?08, ?16 = number of pairs (?1e, ?2d & ?2e) ?18 = number of pairs (?se) ?eedp = high speed edge card ?qts = q strip ? ?08, ?16 = number of pairs sctp = compression test probe no. of pairs dut end option instrument end option no. of pairs assembly length y x spirit ? dut end (?1e shown) instrument end (?eedp shown) for complete speci cations see www.samtec.com?sctp cable: 30 awg twinax (gen 1 & industry standard) gen 2: tbd awg twinax signal routing: 100 differential (?) operating range: gen 1 & industry standard dc to 1.25ghz (2.5gbps) gen 2: dc to 2.5ghz (5.0gbps) pinout mapping: see www .samtec.com?sctp rohs compliant: ye s specifications specifications (59,99) 2.362 assembly length 02 01 100 99 (6,76) .266 qts series instrument end interface spirit ? flying lead dut end interface ?12.00, ?24.00, ?36.00 = assembly length in inches ?1e = spirit ? gen 1 ?2e, ?2d = spirit ? gen 2 ?se, ?sd = spirit ? is (industry standard) for complete speci cations see www .samtec.com?sfl tp cable: 30 awg twinax signal routing: 100 differential (?) operating range: dc to 1.25ghz (2.5gbps) rohs compliant: ye s target board flex tips patent pending hdr-135965-01 (kit of 20) f-209-2 sctp, sfltp sfltp = flying lead test probe patent pending te es es st st st pr pr pr o o o e e e ? est prob te es es st st st pr pr pr o o o e ? connector* lgp-14-g-d lgp-24-g-d lgisr-14-g-d lgisr-24-g-d lgis-27-01-e-d extraction tool cat-ex-sctp-02 cat-ex-sctp-01 na na na probe type pairs gen 1 gen 2 industry standard 8 16 8 16 18 probe fastener* spf-14 spf-24 spf2-14 spf2-24 spfd-27 * add -tr to the part number for tape & reel ** pre x part number with ?it- for complete kit with probe cable, replacement connectors, application notes and product fasteners connectors & probe fasteners** x no. of pairs ?08 ?16 & ?18 (22,05) .868 (34,04) 1.340 y (17,98) .708 (29,97) 1.180 sctp?16?12.00?1e?qts s g s
www.samtec.com eliminate costly pcb test probe connectors (1,27) .050 (11,68) .460 (3,81) .150 (2,54) .100 (1,00) .039 (2,44) .096 s s g hdr?135965?01 (case of 20) (6,99) .275 (34,04) 1.340 a (8,73) .344 (4,70) .185 (6,35) .250 (3,56) .140 (9,40) .370 a (6,99) .275 spirit ? compression test probes patent pending ? logic analysis, protocol analysis, oscilloscopes, trace output and testing applications from 1.25 gbps to 5.2 gbps ? enables high speed testing compatible with intel specific pci express protocol footprint ? replaceable probe tip connectors extend probe life indefinitely ? spring loaded shroud protects compression contact tips (gen 1) ? choice of 8 pairs (gen 1) or 16 pairs (gen 2) or 18 pairs (industry standard) ?q strip or high speed edge card instrument end interface ? available as components or complete kits with probe, replacement connectors, application notes and probe fasteners. includes extraction tool for gen 1 probe. (add kit- in front of the cable part number.) ? application specific logic and protocol analysis applications with differential pair counts and pinout maps available; contact dr@samtec.com tip resistance value = 300 es te es es st st st pr pr pr o o o e e e ? est prob te es es st st st pr pr pr o o o e ? spf?xx spf2?xx spfd?27 spirit ? fl flying lead test probe patent pending ? picks up differential signals not conveniently grouped or routed to connectors ? flex tip provides improved si performance over two piece connector system ? available as kit with probe, application notes and case of 20 flex tips (add kit- in front of the cable part number.) tip resistance value = 300 14 (8 pair) 24 (16 pair) (22,05) .868 (34,04) 1.34 position (pair) a applications applications dut dut low-cost replaceable probe tips extend probe cable life inde? nitely low-cost probe fasteners replace conventional pcb sockets dut sfltp?08?12.00 sctp?18?12.00?se?eedp 297
|
